designed by Norman Whittle
Peter Hofacker's new CL competition stunter for season 2012
I believe Norman Whittle was the first person who made a professional CAD drawing of a electric powered Control line plane.
I got a copy from Peter Germann (many thanks ) and took the freedom the built a plane.
My plane is an equal copy, except the stabilo which has been enhanced by 3 mm (profil shape).
Here are the technical features:
| Construction | |
| Wing span | 1520mm / 59.84 inch |
| weight | 1726 gr / 60.88 oz with battery included |
| General | Completely built in Balsa wood |
| Bellcrank | Yatsenko Copy (115mm / 4.52 inch) |
| Ruder lever | Brodak 3.2mm / 0.125 inch wire) |
| Fuselage | Sandwich building Balsa/Laminate/Plywood |
| Landing gear | Brodak (too heavy) |
| Finish | |
| Wing and Stabilo | Covered with ORACOVER |
| Fuselage | Covered with paper 5 times colored with sanding between each spray run Final coat with transparent lacquer |
| Power train | Engine AXI 2826 - 12 |
| ESC Castle Creations ICE Light 75 A | |
| Timer Hubin FM-9 | |
| Lipo Battery Desire Power 2650mAh/5S 18.5V 45C (or 25 C 2600mAh) | |
| Prop. APC "pusher" 13 x 4,5 inch | |
| Line set up | 0.38mm / 0.015 inch line, length 19.36m / 63.47 feet |
| Lap time estimation | 5.3 seconds |
| Handle | Yatsenko |
Peter Hofacker, 28. October 2012
Die Datenbankverbindung ist fehlgeschlagen, bitte überprüfen Sie die Datenbank-Einstellungen.